Steel Fender Flares, Front & Rear, 4 PCS | 2007–2018 Jeep Wrangler JK/JKU

✅ VEHICLE COMPATIBILITY
• Jeep Wrangler JK: 2007–2018 (2-Door)
• Jeep Wrangler JKU Unlimited: 2007–2018 (4-Door)

❌ DOES NOT FIT

• 2018+ Jeep Wrangler JL / JLU

Please verify your Jeep generation and door configuration before purchase.

Product Type: Front & Rear Tube Fender Flares, 4 PCS

Placement: Front & Rear

Fitment: Jeep Wrangler JK / JKU, 2007–2018

Material: 1.5" Steel Tubing + 16-Gauge Body + 11-Gauge Mounts

Finish: Anti-Rust E-Coat & Textured Black Powder Coated

Front Flare Dimensions: 47.63" L × 21.6" H

Front Coverage: 5.79"

Rear Flare Dimensions: 45.59" L × 17.35" H

Total Weight: Approx. 57 lbs

Installation: Bolt-On; Rear May Require Drilling

Installation:

Remove the factory fender liners, install the rivet nuts, align the fender flares, secure with the included M8-25 hardware, and fully tighten after alignment.

Installation Requirements:

Socket ratchet wrench, 5mm hex bit socket, included rivet nut tool, 13mm wrench, 13mm shallow socket, and electric drill with 9mm drill bit.

Installation Time: Approx. 2.5 hours / 2 workers

Installation Guide Included:

A detailed installation guide is included with the product.

Notes:

Check all hardware before assembly. Rear mounting may require minor drilling. If mounting holes are undersized, carefully trim or ream them at low drill speed.

2 × Front Tube Fender Flares (Driver & Passenger Sides)
2 × Rear Tube Fender Flares (Driver & Passenger Sides)
1 × Complete Mounting Hardware Kit
1 × Installation Instruction

WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go towww.P65Warnings.ca.gov.