44.6"L Rear / 45.5"L Front Dakrova Tubular Steel Fender Flares, LED Turn Signals | For 2007-2018 Jeep Wrangler JK JKU 2/4 Door, Textured Black

✅ COMPATIBLE: 2007-2018 Jeep Wrangler JK & JKU (2/4 Doors)
Engineered exclusively for the JK body style. Fits all sub-models (Rubicon, Sahara, Sport, Unlimited, etc.) within these years.
• 2007-2018 Jeep Wrangler JK (2-Door)
• 2007-2018 Jeep Wrangler JKU Unlimited (4-Door)

❌ STRICTLY EXCLUDES (Do NOT Buy):
• 2018+ Jeep Wrangler JL (The newer body style)
• Jeep Gladiator JT
• Older models (TJ, YJ)

Product Type：Flat Upper Plane Tubular Fender Flares (4-Piece Set)
Materials：1.5" Steel Tubing + 16-Gauge Body + 11-Gauge Brackets
Exterior Finish： Premium E-Coating Inside + Textured Black Powder Coat
Total Weight： Approx. 63.9 lbs (Heavy-Duty Construction)
Front Flare Dimensions: 45.5" L × 20.5" H × 6.7" W
Rear Flare Dimensions: 44.6" L × 19.1" H × 5.9" W
Integrated Lighting：Amber LED Turn Signals (Pre-installed on Front Flares)

Installation: Position front and rear fender flares against vehicle wheel arches first, drill mounting holes referring to the prefabricated hole positions on the fender flares. Fasten the fenders sequentially using hex bolts, flat washers and flange hex lock nuts to specified torque. Install embedded threaded inserts via dedicated ram tools for auxiliary bracket mounting. Complete wiring connection for built-in indicator lights: connect the black negative wire to factory black wire, red turn signal wire to factory white/yellow turn signal wire; prepare 13mm wrench and 13mm socket wrench for on-site assembly work.

Notes: Thoroughly read pre-installation instructions before operation; professional installation is strongly recommended, especially for drilling and electrical wiring work. Inspect all supplied hardware prior to installation, periodically check and retighten mounting bolts in daily use. This product is mainly intended for decorative wheel arch extension, it cannot provide impact protection for vehicle body. The manufacturer shall not bear responsibility for vehicle paint damage, body structural deformation, circuit faults or personal injury caused by improper drilling, unqualified wiring, insufficient bolt torque and neglected routine hardware inspection.

2 × Front Tubular Fender Flares (with built-in LED Turn Signals)
2 × Rear Tubular Fender Flares
1 × Complete Hardware Mounting Kit (Screws, bolts, nuts)
1 × Installation Instruction Manual

WARNING:This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go towww.P65Warnings.ca.gov.